Salary guide, May 2025
CNC Programmer pay in Orlando-Kissimmee-Sanford, FL
Manufacturing Headhunters uses the published BLS OEWS figures below. They describe the mapped occupation and area, not an individual offer.
This is what we do all day: recruit manufacturing professionals.
The median annual wage for Computer Numerically Controlled Tool Programmers in Orlando-Kissimmee-Sanford, FL was $62,220 (U.S. Bureau of Labor Statistics, OEWS, May 2025). The middle half of workers earned between $52,960 and $65,150.
The Orlando-Kissimmee-Sanford, FL median is $5,900 below the national median of $68,120, both from BLS May 2025.
Direct match · SOC 51-9162 Computer Numerically Controlled Tool Programmers
The CNC Programmer title maps to the published occupation. The duties align, but BLS combines employers and industries.
What should you know about orlando-Kissimmee-Sanford, FL?
| 10th | 25th | Median | 75th | 90th |
|---|---|---|---|---|
| $36,990 | $52,960 | $62,220 | $65,150 | $72,870 |
| 10th | 25th | Median | 75th | 90th |
|---|---|---|---|---|
| $17.78 | $25.46 | $29.92 | $31.32 | $35.03 |
BLS estimated 50 workers employed in this occupation in Orlando-Kissimmee-Sanford, FL. Location quotient: 0.21.
What should you know about united States?
| 10th | 25th | Median | 75th | 90th |
|---|---|---|---|---|
| $47,530 | $58,270 | $68,120 | $81,890 | $100,320 |
| 10th | 25th | Median | 75th | 90th |
|---|---|---|---|---|
| $22.85 | $28.01 | $32.75 | $39.37 | $48.23 |
What should you know about role pay against all occupations here?
The published CNC Programmer median is $62,220. The all-occupations median in Orlando-Kissimmee-Sanford, FL is $46,630. Ratio: 1.33 (role median divided by all-occupations median, same units, BLS May 2025). Location quotient 0.21 measures how concentrated this occupation's employment is here against the nation. It is not a wage index.
What should you know about two BLS releases?
| Release period | 25th | Median | 75th |
|---|---|---|---|
| May 2024 | $47,410 | $56,430 | $66,140 |
| May 2025 | $52,960 | $62,220 | $65,150 |
These are two separate BLS estimates from different survey panels. The workers and employers behind them differ, so the gap is not like-for-like pay for the same workers and is not a growth rate. We show no percentage change.
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025. SOC 51-9162 Computer Numerically Controlled Tool Programmers, Orlando-Kissimmee-Sanford, FL. Official occupation data · Official area tables. Released 2026-05-15.
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025. SOC 51-9162 Computer Numerically Controlled Tool Programmers, U.S.. Official occupation data · Official area tables. Released 2026-05-15.
What should you know about nearby areas?
| Area | Median | 25th to 75th |
|---|---|---|
| Palm Bay-Melbourne-Titusville, FL | $72,790 | $61,250 to $85,500 |
| Tampa-St. Petersburg-Clearwater, FL | $58,910 | $43,060 to $74,480 |
What does this data mean for your opening?
Manufacturing Headhunters reviews the Orlando-Kissimmee-Sanford market, which shows 50 CNC programmers. This role requires technical proficiency in CAM software such as machining CAM software, multi-axis CAM software, machining CAM software, integrated CAD/CAM tools, and integrated CAD/CAM CAM. Professionals here must manage complex multi-axis toolpaths and post-processors while generating accurate setup sheets to facilitate cycle-time reduction.
While the median wage is $62,220, the local P25 to P75 band width is $12,190. This reflects a lower range compared to the national middle band width of $23,620. National manufacturing industry data shows higher medians for Aerospace at $97,710, Food at $90,380, and Dairy at $86,190. For CNC Programmer in Orlando-Kissimmee-Sanford, FL, OEWS measures straight-time gross wages, not pure base salary or total compensation. Commissions and production bonuses are included; overtime, shift differentials, nonproduction bonuses and benefits are excluded.
For CNC Programmer in Orlando-Kissimmee-Sanford, FL, releases are separate survey estimates. The May 2025 median is $62,220; the May 2024 median is $56,430. Their arithmetic difference is $5,790. They are not the same workers' raises and do not establish a pay trend or its cause. Orlando currently maintains a location quotient of 0.21, signifying a lower concentration of these roles compared to the national average. When comparing Orlando to other Florida metros, Palm Bay-Melbourne-Titusville shows a median of $72,790, while Tampa-St. Petersburg-Clearwater records a median of $58,910. These comparison metros represent the highest occupational employment hubs in the region rather than geographic proximity. Note that the published BLS data relies on standardized surveys, which do not account for specific machine-shop experience or individual skill certification beyond the SOC 51-9162 classification.
For hiring managers, understanding these figures is essential for regional competitiveness. The middle band width of $12,190 indicates moderate spread in compensation within this specific metro. Because the BLS data combines various employer types, individual plant requirements for setup efficiency or specialized tool programming may command rates beyond the median. The Orlando mean wage is $60,080, which sits slightly below the median, indicating a skew in the distribution of the 50 reported positions. Managers should evaluate their own compensation strategy against these regional benchmarks to ensure talent attraction without exceeding established local market limits. The data excludes benefits and variable compensation, which are significant in the competitive manufacturing climate.
Which pay questions should you settle before hiring?
How does the Orlando CNC programmer median compare to the national figure?
This indicates that Orlando roles currently pay less than the overall national average for this occupation.
What is the significance of the middle band width in this report?
The middle band width of $12,190 in Orlando represents the difference between the P25 and P75 percentiles. It shows the range where the middle half of the local workforce is compensated.
Does the BLS data account for the specific CAM software skills required?
The BLS classification 51-9162 covers CNC programmers generally but does not report wages by specific software brand. Managers must factor internal assessment of skills like machining CAM software or integrated CAD/CAM CAM separately from these baseline wage reports.
Related recruiting or pay page · Related wage comparison 1 · Data methodology · Related wage comparison 3 · Related wage comparison 4 · Related wage comparison 5